Chlorine trap Use method Portable chlorine gas eliminator (1) Open the injection pipe, pull out the safety clip, press down the handle, place it upwind of the leakage point, and spray downwind. (2) Equip effective gas masks when using. (3) Check the filter frequently. If the pointer of the pressure gauge is lower than the green area, fill nitrogen immediately. (4) Driving gas: nitrogen 1.2MPa chlorine gas trap trolley type (1) Two person cooperation operation: open the injection pipe, one person pulls out the safety cutter, pull up the switch handle, one person turns on the spray gun switch, located upwind of the leakage point, and spray downwind. (2) Equip effective gas masks when using. (3) Check the filter frequently. If the pointer of the pressure gauge is lower than the green area, please fill nitrogen immediately. (4) Driving gas: nitrogen 1.6Mpa