Precautions for use of chlorine trap

Date of issue: 2019-11-09 Author: Dazheng Chemical Click:

one Chlorine trap Try not to put it directly in the production workshop to reduce the corrosion of the gas head of the filter cylinder. It should be stored in a room near the site to prevent exposure to the sun and rain and extend the service life of the filter. At ordinary times, pay attention to check the pressure gauge of the filter. When the pointer is lower than the green area, nitrogen should be added immediately, and the pointer can be restored to the green area (1.6Mpa).

2. Chlorine gas eliminator is a device to neutralize the leaked chlorine in coordination with the rescue and plugging work, not a plugging tool. In case of chlorine leakage, the rescue personnel can first use the spotgun to reduce the concentration of the leaked chlorine by strafing, and then find the leakage point for plugging work. The operator of the filter shall be located in the upwind direction of the leakage point and spray downwind. Do not spray at the leakage point to avoid affecting the sight of the plugging personnel. The powder is a strong alkaline substance, and attention should be paid to the protection of skin and eyes when using it. Chlorine trap The warranty period of the powder contained in the device is two years. The user unit should contact our center to replace the powder when it expires, so as to effectively neutralize the leaked chlorine during the rescue.